Several balcony areas and terraces are built above the living areas, on the flat terrace above the extension, or on the upper floor of the living area, kitchen or bedroom, or apartment complex.
The surface of the balcony and the balcony waterproofing require much attention.
An important part of the building works
Balcony waterproofing is needed for protective any area under the balcony should be protected from perennial water ingression damage. Balcony surfaces in areas where snow or repeated rainfall occurs is an important part of building work and cannot be taken lightly.
Balconies waterproofing on top of rooms and ceiling areas and should be implemented properly from the start otherwise some concerns are coming.
Keep the balcony safe with water
There are a lot of new technologies and equipment, but there are also various techniques available that can protect your balcony protect from water. Balcony surfaces are made of concrete, using a layer of waterproof material that covers the stuff.
Concrete structures face different problems than building timber or steel, and materials from one are not suitable for another.
If you do not use the right system or waterproofing properly, you will often have the problem of repeatedly fixing the surface of your balcony.
The material chosen should have the proper diffusion capabilities as the material around them and be able to adhere to it and form a good bond and seal.
Proper order of Works
Penetrating work and fixing must be done before water sealing and waterproofing. If you are building balustrade in these areas, you need posts of balusters that address the structural element of the building.
In cases such as these, the balcony waterproofing material must be able to cover around these and remain joined to the steel of the railing posts.
Choosing a brittle material is not advisable because it extends far beyond the steel material and can cause leakage at that time.
When fixing any material for a completed roof, one must be very aware of the volume of water and properly seal it with the appropriate material.
Balcony waterproofing strategy
You can adopt a number of ways of waterproofing balcony surfaces, like using a waterproof layer on the bottom and top or sealing the external part of the tiles.
There are distinct advantages to using a waterproof membrane on the bottom and top, which leaks and erodes moisture from the panels and has a better ability to withstand the vibration.
The water should be properly circulated, keeping the water in a different direction so that the water does not stand and see into the surface. This drainage strategy also helps to regenerate and reduce any water on the surface.
So make sure you apply the following strategy to ensure a good balcony sealing and prevent water ingression.
- Complete all penetrating tasks to apply waterproofing.
- Make sure any penetrating material is applied with extra sealant, which will create an additional seal on these.
- Make sure you have a good drainage plan that works with balcony levels so that no water pools are formed.