Why Do We Need To Waterproof Homes? We live in an era where rain is viewed as the enemy. We spend more time than ever before working hard to avoid getting wet, especially with the thought of having to carry an umbrella around on rainy days. But why do we need to waterproof our homes?
Waterproofing is a process that aims to keep a structure from getting damaged by water through the use of waterproof material. It is commonly used on roofs to keep water out and prevent damage caused by mold or other problems that can happen when water leaks into a building.
Despite the hefty price tag for this type of work, it does not take long before people realize how necessary it is for their home. In addition to protecting you from the natural elements outside your home, waterproofing also protects important parts inside your home, such as electrical wires and equipment, damp foundations, and drywall or plaster walls.
At first glance, it might not be clear how waterproofing can protect your home, but there are several benefits to this type of work:
Waterproofing will essentially create a barrier between the exterior and interior sections of your home. This means that mold will never have the opportunity to grow on the surface of drywall or plaster walls. Prevent Damage
After protecting all areas from water damage, waterproof material is usually used as a protective film around valuable devices such as electrical boxes, wiring, and plumbing fixtures.
Overall Protection Against The Elements – Since water damage can happen at any time, even when you’re not expecting rain, sealing up all points where could potentially enter the structure is an important way to ensure that your home is always protected from the elements.
Whether you live in an area that gets a lot of rain or if it tends to be dry, waterproofing your home protects against the elements.
There are many different types of materials used for waterproofing homes. Some are better at certain tasks than others, but all have their benefits and drawbacks depending on the area they are being placed in. Here are some of the most common types:
These are often applied with spray equipment over flat roofs so they can stretch out without tearing easily. This makes them perfect for preventing leaks when water enters through areas where there is no built-up surface. It’s not so good at protecting surfaces that already have a rough texture to them because it can be difficult to get the membrane into place without tearing.
This type of waterproofing is similar to rubber membranes, including spray equipment, but it can also come in a paint version that will give you more control over how much you apply and where the sealant goes. It’s great for areas that already have roofs with texture or shingles because it can be applied delicately, so there are no issues with tearing the coating while applying it.
However, this type of material won’t work in places like schools or commercial buildings as it is not designed for high traffic areas where people could easily damage it with their boots or shoes.
These waterproofing materials work in one of two ways: either coating an existing surface with a synthetic chemical to keep it watertight or by actually forming a barrier between the interior and exterior portions of your home.
This material works for most surfaces that need waterproofing, such as flat roofs, concrete patios, and driveways, or walls that have been covered with drywall or plaster. It is also incredibly long-lasting; however, this type of material does make surfaces somewhat slippery when they get wet, which could be dangerous for people walking on it, like roof shingles.
AMAs are applied over existing asphalt and work well, especially in areas where roofs may see intense sun exposure due to their reflective properties. It also lasts a long time even when the building is being used heavily. However, it can be very expensive to have put on, so if you are planning on selling your home shortly, this may not be the best route for you to take.
This is one of the most common waterproofing methods that are applied over new or old roofs with shingles or other types of asphalt surfaces that are already installed on homes. It’s easy to apply, low cost and protects homes against water damage from heavy storms. One negative aspect is that it does wear down fairly quickly at about 10 years, depending on how much rain comes in during any given year, which means doing repairs or replacements before the sealant wears out completely.
These waterproofing materials are typically used on garages, commercial buildings, and other high traffic areas where there is a risk for damages to be done if they aren’t designed to resist moisture chemicals or oil damage to the surfaces underneath them. They come in either paint forms or rubber-like coatings, which can make them expensive depending on what you need them for.
This type of coating involves a combination of cement and fiberglass powders that can be applied directly onto concrete surfaces such as driveways, sidewalks, and patios that have been installed after 1987 when building codes changed from allowing homes with this kind of surface to go without any additional protection against water damage.
This is another popular way to waterproof your roof that involves installing a synthetic rubber or plastic material over your existing surface then fastening it down with nails, screws, or special adhesive materials.
It’s very effective for homes though expensive; however, the less porous the surface of the underlying layer, the more maintenance will need to be done on this type of material because it can sink into areas like concrete, brick, and tiles which means water could still get through to any surfaces underneath them.
These types of materials are typically made up of rubber membranes that overlap each other, creating an impenetrable barrier against moisture that comes in through cracks or holes in roofs like those with shingles. These sheets can also be used underwater as well as in marine climates which means it is an effective way to protect homes against leaks that come with heavy rains or hurricanes.
This is another type of coating typically used on roofs and driveways where asphalt or shingle surfaces have been installed after 1987 when building codes changed from allowing homes without these types of waterproofing products to go unprotected against water damage.
It’s a very durable material and works especially well for areas exposed to the sun frequently. A drawback is that it needs to be reapplied every five years or so depending on what kind of climate you live in, how often your home gets rained on, what type of roofing materials have been installed, and what the external temperatures are are are like.
Waterproofing is a common expense for homeowners, but it’s important to remember that this type of work can save you a lot of money in the long run by protecting your building against water damage.
In addition, there are more benefits associated with waterproofing services, such as an increase in property value, less wear on parts and flooring, and an overall sense of security due to knowing all openings have been sealed off.
In conclusion, waterproofing is a big part of home maintenance and should be done for your safety as well as to protect the value of your property. This type of work isn’t limited to outside materials either.
There are many ways that homes can become damaged from water entering them, including but not limited to: faulty or poorly installed septic tanks, blocked drainage lines, cracked walls or foundations, improperly sealed doors and windows, unfiltered rain gutters, and other types of holes in roofs, etc.